Modified Bitumen Testing Equipments

Approx. Rs 45,000 / UnitGet Latest Price

Product Details:

General Specification:

• It is a motor driven mechanical compactor useful for compaction into 100 mm dia moulds. It is fitted with a compaction rammer of 98.5mm dia, weighing 150 kg. with a free fall of 457 mm
• The rammer assembly is provided with a ratchet and pawl arrangement to lift it from the top of the test sample When the rammer reaches the required height the pawl release the rammer which falls freely on test specimen
• The release mechanism is connected by an arm moving up and down which is connected to a reduction gear coupled to the motor through another arm
• An automatic blow counter fitted to the compactor is used to set the number of blows. The Compactor is supplied complete with wooden pedestal. Suitable to work on 220V, 50 Hz, AC single phase

Optional Accessories:

• Digital Display electronic counter

Optional Accessories:

• Digital Display electronic counter

Approx. Rs 40,000 / UnitGet Latest Price

Product Details:

Marshall Stability Test Apparatus are used for the measurement of resistance to plastic flow of cylindrical specimens of bituminous paving mixtures when tested in a marshal load frame. Test specimens are produced and tested at a speed of 50.8mm/min.The maximum load(stability) and deformation(flow) of the specimen are recorded. Generally the test is applicable to hot mix designs using bitumen and aggregate of maximum size of 25mm. Widely used for designing and evaluating bituminous paving mixes.

General Descriptions & Specifications :

Load Frame :
A floor standing compression loading frame of 50 KN capacity with motor and worm gear housed within the base unit, producing a platen speed of 50.8mm/min. Limit switches are provided to cut out the platen over run on the downward travel. A handle is provided for manual operation during calibration etc. The load frame is fitted with ON/OFF/Reversing switch and power indicator lamp in front. Suitable to work on 230V, 50 Hz, AC single phase.

Marshal Moulds (3 Nos.):
4”dia X 3” height specimen moulds, base plates and Extension collar. Manufactured from steel.(6“ dia mould can be supplied at extra cost)

Compaction Pedestal:
Comprising of a hard wood block with a steel plate, complete with specimen holder, semi circular base and a circular top to hold 4” dia specimen mould in place during compaction of the specimen. (Pedestal to accommodate 6” dia specimen can be supplied at extra cost)

Compaction Hammer (2 Nos.):
Designed for use with the compaction pedestal and mould. The hammer has a falling weight of 4.535 kg and free fall of 457 mm.

Breaking Head Assembly Consisting of upper and lower cylindrical segments with provision for fixing flow meter. Suitable to take 4” dia specimens. ( Assembly to accommodate 6” dia specimen can be supplied at extra cost)

Specimen Extractor:

• Consisting of a load transfer bar, pressure plate and steel ball,

Specimen Extractor:

• Consisting of a load transfer bar, pressure plate and steel ball

Optional Accessories:

• The following accessories and consumables are not part of the standard supply and are mandatory for the testing work